Products

Contact Person : Mr. Shuo Heng
Company Name : Ningjin County Hengshuo Solar Energy Equipment Co., Ltd.
Tel : 86-534-5215452
Fax : 86-534-5236452
Address : Shandong,Dezhou,No.2, Liaoheng Road, Yinhe Economic zone, Ningjin County, Dezhou, Shandong
Country/Region : China

Automatic Production line of out barrel

Product Detailed

1.used for the pressure and seal the outer barrel after folded the edge 2.motor reducer drive 3.Roll forming system

Automatic Production line of out barrel

We are located in Yinhe Development Zone of Ninjin County Shandong China. Our factory has an area of 115000 square meters and we have complete and advanced manufacturing equipment. Now we have 35 professional technicists, accounting for 3% of the total employees. We have passed by ISO9001,ISO2000 authentication.

This combined machine with rolling-installing is designed according to the WC6Y-63/2500 press machine and the advanced technology of America.

Shape of the machine body: one side closed, another side opened

The transmission system: the crank rod system with pulley, gear, pneumatic clutch and brake. The bottom end fixed with one poles, and the other side produce the cut by support with the fulcrum.

Mould: has double function with the pressure and rolling for the cut.

Main performance parameters and configuration

Item	Name		parameter
Technical specifications and parameters	The shape of the working piece		round
	The minimum stamping force		Min600KN(60>52≈1800×7×4=50.T
	Designed capacity		80T
	Diameter of the barrel		No less thanΦ350(length of the barrel less than 2000mm)
	The maximum length of the barrel		Depends on the request of customer
	Adjustable space of the bottom bar		less than 30mm
	Adjustable space of the supporting plate		less than5mm
	Route of supporting plate		less than70mm
	number of continuous punchings		60times/min
Working parameter	throughput		3pcs/min(example:350mm barrel)
	High level. Die		1300mm
	Modulus of main components		The maximum modulus bending beam section
			240-290 steel
			Calculated modulus: 1240>869(cm3)
	Frame mold designed according to the actual needs and rotation institutions condition.
	The transmission system use sliding bearing structure
	pneumatic brake and clutch
lubricating system	quantitative oil cup
electrical control system	single test controll, two or four joint control, and automatic control in regular production
Processing conditions	supply workpieces	Manual work
	Move workpieces	Manual work
	Remove workpieces	Manual or automatic
Main body of the machine	lathe bed	Overall welding, aging treatment
	Lead rail of the board
	Protection of machine	set shield on important parts.
	Protection over mould	Mechanical safety protection
	supporting cylinder	Reaction time 2 seconds
mould	Assembly form	single split mold
	Turn on	return switch Spring life 100000 times
electrical control gear	Electrical specification	Primary power		380V±10%
		Input circuit		380V
		Circuit of main motor		24V
		Control loop		380V
		Light of machine		36V
	stop	Panel
	Click Protection	Thermal relay, overload protection, grounding protection